SHENGDAYIN -- HMD

A permanent magnet synchronous drive pump is developed, and a torque ring high temperature magnetic drive pump is initiated. The extension of API standard magnetic drive pump creates a new leak-free pump design concept.

SHENGDAYIN.-ANSI MAG

ANSIMAG pump adopts dupont company's fluoroplastic and high performance polymer lined ductile iron as shell, pump interior with silicon carbide shaft integral impeller patent structure. The Brittle fracture pressure of the sealing isolation cover made of fluoroplastic and carbon fiber reinforced materials is 6 times of the pump design pressure, and there is no eddy current loss. 1. The overall design is simple and practical. 2. All flow-through parts are made of non-metallic materials.

Shengdayin-caster products range from miniature plastic pumps to the large multi-stage magnetic drive pumps of the AP1685 standard. 1. All kinds of metal and non-metal material pump. 2. Magnetic driven vortex pump with small flow and high lift. 3. Magnetic drive vane pump for high viscosity transportation. 4. Vertical pump or self-priming pump with low cavitation margin.

GS series

Flow rate: ~ 720 m3/h

HEAD: ~ 200m

GS type is a multi-purpose universal process pump series, suitable for a wide range of operating conditions and various applications, with the maximum interchangeability of parts and the minimum pump type as the design goal. The Yu includes the GSA (Ansi Standard Pumps) and GSI (ISO standard pumps) . Temperature in-40 to + 260 °C, can choose low-temperature GSL, for-100 °C occasions. Materials include 316,20 alloy, Hastelloy, etc. .

SP series

FLOW: ~ 55m3/h

HEAD: ~ 46m

Self-priming type, mainly designed for tank/tanker unloading. Rapid self-priming operation is ensured by excluding incoming gas from the inlet pipe. The temperature ranges from-40 °C to + 120 °C. The materials include 316,20 alloy, hastelloy, etc. .

CS series

Flow rate: ~ 300 M3/H

HEAD: ~ 150m

High temperature type magnetic drive pump is especially suitable for conveying hot oil and other high temperature heat carriers. HMD Patented Torque Ring design-solves The problem of traditional mechanical seal in high temperature application, up to 450 °C without cooling water. Materials include cast steel and 316.

HP series

FLOW: ~ 100m3/h

 head: ~ 70m

High pressure pump, suitable for high system pressure applications, system pressure up to 350 bar. Motor Flange can be used for compact connection or separate installation type. The temperature ranges from-40 °C to + 120 °C. The materials include 316,20 alloy, hastelloy, etc. .

GSP series

Flow rate: ~ 720 m3/h

HEAD: ~ 200m

GSP pump type is designed according to API 610/685 standard on the basis of GS series. It is suitable for heavy duty oil refining and petrochemical applications. Pump operating temperature in-100 °C to + 350 °C range, system pressure up to 350 bar. Materials include cast steel, no. 316, no. 20 alloy, Hastelloy, etc. 

MAGMAX series

Flow rate: ~ 100 m3/h

HEAD: ~ 98m

Maagmax is a new development of HDM on behalf of the future direction of leak-free pump patent products, also known as shielding magnetic drive pump. Combining the advantages of magnetic pump and canned pump: simple structure, convenient site maintenance, with the second layer of protection to prevent leakage, truly realize 3000 rpm/min synchronous speed high efficiency, long service life of silicon carbide bearings safe and reliable. The temperature ranges from-40 °C to + 120 °C. The materials include 316,20 alloy, Hastelloy, etc. .

All pumps above are centrifugal

MCA API 685 centrifugal pump

Flow rate: ~ 400 m3/h

HEAD: ~ 200m

TEMPERATURE:-100 ~ 350 °C

PRESSURE: ~ 50 bar

Materials: AISI316 OR 316L; cast steel; Alloy No. 20; monel-400; Harrington B or Harrington C-276

MCP ISO 2858 & Ansi B73.1 Centrifugal pump

FLOW RATE: ~ 200m3/h

HEAD: ~ 100m

Temperature: 130 °C

PRESSURE: 25 Bar

MATERIAL: PP-PVDF-ETFE

Flow rate: ~ 100 m3/h

HEAD: ~ 40m

TEMPERATURE:-50 ~ 110 °C

PRESSURE: 10 Bar

MATERIAL: PP-PVDF 

MCH Centrifugal pump

Flow rate: ~ 100 m3/h

HEAD: ~ 40m

TEMPERATURE:-50 ~ 110 °C

PRESSURE: 10 Bar

MATERIAL: PP-PVDF

MTA VORTEX PUMP

FLOW: ~ 9m3/h

 head: ~ 150M 

TEMPERATURE:-100 ~ 350 °C 

pressure: ~ 25 Bar 

Material: AISI316 or 316L;

 Alloy No. 20; 

Harrington B or Harrington C-276

MP SLIDE VANE PUMP 

FLOW: ~ 35 LIT/MIN

 HEAD: ~ 5 BAR 

TEMPERATURE:-40 ~ 40 °C

 pressure: 8 Bar 

Material: PP-PVDF

MPA SLIDE VANE PUMP

 FLOW: ~ 35lit/min 

head: ~ 13 BAR 

TEMPERATURE:-70 ~ 250 °C 

pressure: ~ 25 Bar 

Material: AISI316 or 316L;

 Alloy 20;

 Harrington B or Harrington C-276

MT VORTEX PUMP 

FLOW: ~ 10m3/h 

head: ~ 50m 

temperature:-50 ~ 110 °C

 pressure: 8 Bar Material: PPDF

MCAV VERTICAL CENTRIFUGAL PUMP 

FLOW: ~ 300m3/h head: ~ 150M 

TEMPERATURE:-100 ~ 350 °C

 pressure: ~ 25 Bar

 Material: AISI316 or 316L; 

cast steel; No. 20 Alloy; 

Monel-400;

 Harrington B or Harrington C-276

MT-SP SELF-PRIMING VORTEX PUMP

 FLOW: ~ 10m3/h 

head: ~ 50m 

temperature:-50 ~ 110 °C 

pressure: 8 Bar 

Material: PP-PVDF

The design complies with Ansi B73.1 dimensions and the impeller can be adjusted to 7-1/2 inches (190.5 mm) 

KF series horizontal

Specs,         models

328　 　       Kf328

438 　 　      Kf438

2110 　　     Kf2110

31-1/210      Kf31510

3210         　 Kf3210

4310         　 Kf4310

6/4/10　       Kf6410

FLOW RATE: ~ 280m3/h

HEAD: ~ 110m

Temperature range:-29 °C to 121 °C

DESIGN PRESSURE: 350 PSI 2()24 bar

Shell material: Ductile Iron, ETFE (ethylene-tetrafluoroethylene Copolymer)

Lining (ANSI standard flange # 150/300)

Impeller material: ETFE filled with carbon fiber (closed) 

BEARING MATERIAL: Silicon Carbide

Kv Series Vertical on-line

Specifications　　　　Model number

21-1/26　      Kv2156

326　　　      Kv326

21-1/28 　     Kv2158

The design conforms to Ansi B73.1 dimensions

FLOW RATE: ~ 70m3/h

HEAD: ~ 100m

Temperature range:-29 °C to 121 °C

DESIGN PRESSURE: 150 PSI 2(10.34 Bar)

CASE MATERIAL: Ductile Iron, ETFE lining

　　　　　(ANSI standard flange # 150/300)

Impeller material: Carbon fiber filled ETFE (closed)

 bearing material: Silicon Carbide

K series horizontal

Specifications 　　　　Model number

1-1/216　K1516

31-1/26　K3156

326　　　K326

436　　　K436

1-1/218　K1518

31-1/28　K3158

FLOW: ~ 159m3/h 

head: ~ 92m

Temperature range:-68 °C to 121 °C

DESIGN PRESSURE: 150 PSI 2(10.34 Bar)

CASE MATERIAL: Ductile Iron, ETFE lining (ANSI standard flange # 150) 

Impeller material: ETFE filled with carbon fiber (closed) 

BEARING MATERIAL: Silicon Carbide or carbon graphite

Specs,      models

326　　   Kp326

FLOW RATE: ~ 80m3/h

HEAD: ~ 37m

Temperature range:-29 °C to 121 °C

DESIGN PRESSURE: 150 PSI 2(10.34 Bar)

CASE MATERIAL: Ductile Iron, ETFE lining (ANSI standard flange # 150) 

Impeller material: ETFE filled with carbon fiber (closed) 

SHAFT/BEARING MATERIAL: Carbon Graphite (or silicon carbide) 

maximum suction height: 20 FT (6.1 m)