SEEPEX INTRODUCTION:

Seepex, headquartered in the city of Portolop, central Germany, specializes in the development and production of single-screw pumps and their worldwide sales and after-sales service. Single screw pump can transport low or high viscosity and corrosive media. SEEPEX has branches and distribution networks all over the world (manufacturing bases: Germany, China and the US) , and our subsidiaries and agencies in more than 50 countries have achieved great success. Seepex's single screw pump, crushing cutter and control system integrates an advanced and sophisticated quality management system. The product uses the high quality material, the quality is perfect, may satisfy the customer higher technical and the quality request. The product system is composed of 8 product groups and 27 product series. The flexible installation design allows it to be used in a wide variety of operating conditions and in almost all industrial applications.

2. Product Range and features:

N series-general purpose pump

Flow | 30l/h-500m/h | 0.132 USGPM-2,200 USGPM

Pressure | up to 48 BAR | 720 PSI

Advantages and features: 

stable, low pulse pumping;

High self-starting rate, even when the gas-liquid mixture reaches 8.5 mWS, 

can be installed in any position, 

large flange inlet, pump operation direction can change according to the direction of delivery;

T series non-flowing material pump

Seepex T series-non-flow material pump can be used for high viscosity materials, these materials mobility is very poor or no mobility. For these materials, the self-priming capacity of the n series will not be sufficient to draw them into the pipe. It is for this reason that the t-series pump will be equipped with a hopper which helps to supply the product safely. Such pumps have been successfully used in almost all industrial sectors for pumping high viscosity products.

Flow | 50l/h-500m/h | 0.220 USGPM-2,200 USGPM 

pressure | up to 36 BAR | 540 PSI

Advantages and features:

 Pump with feeding hopper and screw conveyor; 

screw pitch and diameter of screw conveyor suitable for feeding operating conditions; 

solution of various viscosity and characteristic transmission medium; 

a wide range of options for grouping design, 

shaft-less end design is also available, 

easy to maintain and clean because of the plug-in connector between the rotating unit and the transmission unit

CS series of food and medicine pumps

SEEPEX CS pumps are mainly used in the food, pharmaceutical, cosmetic and chemical industries. The PUMP WITH CIP (field cleaning) and SIP (field sterilization) functions can meet the higher requirements of the use of health, suitable for processing, cleaning and sterilization, in line with the United States 3-a sanitary standard specifications and EHEDG specifications.

Flow | 30l/h-130m/h | 0.132usgpm-572usgpm 

pressure | up to 24 bar | 360psi

Advantages and features:

 the plug-in joint between the rotary device and the transmission device is easy to maintain, and can be disassembled and installed without special tools; 

High-quality pump shell walls and rotating internal parts surfaces simplify the no-residue cleaning process; 

easy-to-install Joints Make Maintenance Easier; and mechanical seals for different applications provide a sanitary rod seal; 

The approved stator material and sub-seal ensure the high safety of the product, and the high flow cleaning in the suction sleeve is in place to ensure no residue and aseptic cleaning treatment.

3. Application:

Screw pump, complete set of dosing device manufacturing