Sales of pneumatic pump manufacturers contact number, especially the application of mechatronics technology, computer and digital information technology, makes the structure and function of pneumatic diaphragm pump more perfect and comprehensive, greatly facilitating the selection of diaphragm pump. The advantage of air diaphragm pump is: because of the use of air as power, so the flow will be automatically adjusted with the back pressure (outlet resistance), suitable for medium and high viscosity fluid.

Sales of pneumatic pump company, and the working point of centrifugal pump is set based on water. If it is used in the fluid with high viscosity, it needs to be equipped with reducer or frequency converter, which greatly increases the cost, and it is the same for gear pump. The pneumatic pump runs reliably in flammable and explosive environment with low cost. Transport fuel, gunpowder, explosives, etc., because: there can be no spark after grounding. There is no heat generated during operation, and the machine will not overheat.

The fluid will not overheat because the diaphragm pump agitates the fluid least. For example, the construction site conditions are poor, and the wastewater discharged by industrial and mining enterprises is easy to be blocked due to many impurities and complex components in the wastewater, resulting in overload of the electric pump and heating of the motor. The air diaphragm pump can pass through the particle level, and can adjust the flow, when the pipeline is blocked, it will automatically stop unobstructed.

In addition, the diaphragm pump has the advantages of small volume, convenient movement, no foundation, small floor area, simple and economical installation. It can be used as a movable material delivery pump. Diaphragm pump can completely isolate the materials from the outside world in the treatment of harmful corrosive materials. Or ensure that in some tests, no impurities contaminate the raw material. It can be used to transport more unstable chemical fluids, such as photosensitive materials, flocculation liquid, etc.

Because the diaphragm pump shear force is low, the physical impact on the material is small. Because the working principle of pneumatic diaphragm pump is similar to that of plunger pump, the diaphragm pump has the following characteristics: the pump will not overheat: compressed air is used as the power, it is a process of expansion and heat absorption when exhausting, the temperature of diaphragm pump decreases when it works, and no harmful gas is discharged, so the diaphragm pump is a pump with larger volume and smaller volume.